Chapter 4. Configuring Via Web-Based Interface; Initial Configuration Wizard - D-Link DIR-806A User Manual

DIR-806A AC750 Wi-Fi Router
User Manual
CHAPTER 4.
INTERFACE

Initial Configuration Wizard

To start the Initial Configuration Wizard, go to the Initial Configuration section. On the opened
page, click the OK button and wait until the factory default settings are restored.
If you perform initial configuration of the router via Wi-Fi connection, please make sure that you
are connected to the wireless network of DIR-806A (see the WLAN name (SSID) on the barcode
label on the bottom panel of the device) and click the NEXT button.
Click the START button.
CONFIGURING
Figure 28. Restoring the default settings in the Wizard.
Figure 29. Checking connection to the wireless network.
Figure 30. Starting the Wizard.
Page 40 of 197
Configuring via Web-based Interface
VIA WEB-BASED