3000-SHEET FINISHER B478
1.1.2 INSTALLATION PROCEDURE
B478I002.WMF
[A]
B478I014.WMF
CAUTION
Switch off the machine (! 1.1.5) and unplug the machine power cord
before starting the following procedure.
1. Unpack the finisher and remove all tapes and shipping retainers.
2. Open the front door and remove the shipping retainers. Remove brackets [A],
[B], and [C] ( x2 ea.).
3. Install the front joint bracket [D] and rear joint bracket [E] (x 2 ea.) (M4x14) on
the left side of the copier.
4. Remove the connector cover [F].
B478
[C]
[B]
[E]
[F]
2
B478I003.WMF
[D]
B478I019.WMF
SM