Ricoh B064 Service Manual page 339

SP Number/Name
5212* Page Numbering
004 Duplex Printout High/Low
Position
5302* Set Time
5404* Password Code Clear Count
001 User Code Counter Clear
5501* PM Alarm Level
5504* Jam Alarm
001 Jam Alarm Level
002 Jam Auto Call
5505* Error Alarm
5507 Supply Alarm Japan Only
001 Paper Supply Alarm
002 Staple Supply Alarm
003 Toner Supply Alarm
128* Interval: Other
132* Interval: A3
134* Interval: A4
141* Interval: A5
142* Interval: B4
160* Interval: B5
164* Interval: DLT
166* Interval: LT
172* Interval HLT
SM
SERVICE PROGRAM MODE TABLES
Function/[Setting]
Vertically positions the page numbers printed
on both sides during duplexing.
[–10~+10/0/1 mm]
0 is center, minus is down, + is up.
Sets the time clock for the local time.
[–1440~1440/+300/1 min.]
To clear all user code counters press Execute
Sets the count level for the PM alarm.
[0~255/0/1]
0: Alarm disabled
The PM alarm goes off when the print count
reaches this value multiplied by 1,000.
RSS functions. Japan Only.
Japan Only
Enables or disables the paper supply call
function. Japan Only
[0~1/0/1]
0: No call
1: Call
If this SP is enabled, use the settings below to
set the supply level to initiate a call for each
paper size.
Enables or disables the staple supply call
function. Japan Only
[0~1/0/1]
0: No call
1: Call
A staple supply call is issued for every 1,000
staples consumed.
Enables or disables the toner supply call
function. Japan Only
[0~1/0/1]
0: No call
1: Call
Sets the level to initiate a paper supply call for
each paper size, if SP 5507 001 is enabled.
Japan Only
[00250~10,000/1000/1]
5-59 B064/B065