Ricoh B064 Service Manual page 785

Rev. 07/2002
3.13.3 FEED BELT AND PICK-UP ROLLER
[A]
B064R053.WMF
⇒
1. Remove the feed unit (
2. Remove the pick-up roller unit [A].
3. Remove the bushings [B].
4. Remove the pick-up roller [C].
NOTE: At re-assembly, make sure that the tab on the front guide plate is above
the pick-up roller.
5. Hold the feed belt holder [D] by the left and right sides, then carefully pull it off
the bushing. Do not let the springs [E] fall.
6. Remove the feed belt [F].
NOTE: When re-assembling, set the pick-up roller springs first, then follow this
procedure in reverse.
SM
[C]
[B]
3.13.2).
3-111
ADF
[D]
[E]
[F]
B064R054.WMF
B064/B065