Ricoh B064 Service Manual page 851

FIRMWARE MODIFICATION HISTORY
BCU FIRMWARE MODIFICATION HISTORY
DESCRIPTION OF MODIFICATION
⇒
When copying originals for reduction through the
DF with nearly 100% image area coverage, part of
the trailing edge shows dirtying.
SC181 occurs when the DF is opened and the
main power is turned on with a specific timing.
SC184 does not occur when the CIS harness is
disconnected.
When a 1-page, non-stapling printing job is sent in
between two stapling jobs, it is stapled along with
the following (2
SC335/337 occur when BCU board warm-up is
performed at a specific point (timing).
B064/B065
BCU FIRMWARE MODIFICATION HISTORY
nd
stapling) job.
FIRMWARE
LEVEL
B0655123 G
8-2
Rev. 01/2003
SERIAL FIRMWARE
NUMBER VERSION
Sept. '02 3.16b
Production
SM