Finisher, Stapler Entrance Sensors - Ricoh B064 Service Manual

1.8 FINISHER, STAPLER ENTRANCE SENSORS

Disconnect the finisher from the main unit.
If the Cover Interposer Tray B470 is installed, remove it. Loosen the three shoulder
screws, remove one set screw, then lift it off the frame.
[A]: Finisher entrance sensor bracket (! x1)
[B]: Finisher entrance sensor (! x1) ($ x1)
[C]: Stapler entrance sensor bracket (! x1)
[D]: Stapler entrance sensor and feeler ($ x1)
SM

FINISHER, STAPLER ENTRANCE SENSORS

[B]
B468R009.WMF
7
[A]
[D]
[C]
B468/B469