Low Power Mode - Ricoh B064 Service Manual

ENERGY SAVER MODES

6.12.2 LOW POWER MODE

Entering the low power mode
The machine enters low power mode when:
The energy saver timer runs out after the last job.
(User Tools - System Settings - Timer Setting - Energy Saver Timer: default setting
is 15 min)
What happens in low power mode
The fusing lamp drops to the prescribed temperature, as shown in the table below
(the temperature drops more than that in energy saver mode). The other conditions
are the same as for the energy saver mode.
Return to stand-by mode
The machine returns to standby mode in the same way as from the energy saver
mode.
Operation Energy Saver Approx.
Fusing Temp. System +5V
Switch LED Recovery Time
On On 165 °C 30 s On
B064/B065 6-122 SM