Ricoh B064 Service Manual page 349

Rev. 03/2003
SP
5913 Switchover Permission Time
5914* Application Counter Display
001 Print Counter
003 Copier Counter
5915* Mechanical Counter Detection
5918* A3/DLT Counter Display
5921 Key Card Setting
5959* Paper Size
001 Tray 1
⇒
SM
Number/Name
SERVICE PROGRAM MODE TABLES
Function/[Setting]
Sets the length of time to elapse before
allowing another application to take control of
the display when the application currently
controlling the display is not operating
because a key has not been pressed.
[3~30/3/1 s]
Selects the total counts that will be displayed
in the UP mode.
[0~1/0/1
0: Not displayed
1: Displayed
Displays whether the mechanical counter is
installed in the machine.
[0~1/0/1]
0: Not detected.
1: Detected
2: Unknown
Determines whether pressing the counter key
displays count confirmation: system initial
settings system manager settings
counter
[0~1/0/1]
0: No display
1: Display
This SP affects the display only, and has no
effect on SP5104 (A3/DLT Double Count).
Enables operation with a key card device
outside Japan.
[0~1/0/1]
0: No key card operation
1: Key card operation
Tray 1 (Tandem Tray) can accept two paper
sizes: A4 LEF and LT LEF. Enter the correct
number to select the size of the paper loaded
in Tray 1:
A4 LEF: 5
LT LEF: 38
If the A3/DLT Tray Kit B475 is installed,
enter the correct number to select the size
of the paper loaded in the kit:
Size No.
A3 SEF 132
B4 SEF 141
A4 LEF 5
A4 SEF 133
5-69
Size No.
11" x 17" 160
8 " x 14" SEF 164
1/2
8 " x 11" LEF 38
1/2
8 " x 11" SEF 166
1/2
B064/B065