Key Counter - Ricoh B064 Service Manual

Rev.10/2002

1.15 KEY COUNTER

1.15.1 INSTALLATION PROCEDURE
1. Hold the key counter plate nuts [A] on the inside of the key counter bracket [B]
and insert the key counter holder [C].
2. Secure the key counter holder to the bracket (2 screws).
3. Install the key counter cover [D] (2 screws).
4. Remove the caps [E, F] from the right cover with a screwdriver.
5. Install the stepped screw [G].
6. Join the connector [H].
7. Hook the key counter holder assembly [I] onto the stepped screw.
8. Change the setting of the Key Counter Management to the customer
requirement (User Tools - System Setting - Key Operator Tools).
9. If necessary, change the setting SP5121 (Counter Up Timing).
[C]
SM
[A]
[B]
[E]
[G]
1-61
KEY COUNTER
[D]
[H]
[F]
[ I ]
B064/B065