Ricoh B064 Service Manual page 852

Rev. 01/2003
8.1.2 GW FIRMWARE MODIFICATION HISTORY
GW FIRMWARE MODIFICATION HISTORY
DESCRIPTION OF MODIFICATION
1st Mass Production
R9 jams (B478 Finisher) were displayed as R7
jams.
At the completion of Document Box scanning, a
message was sometimes displayed asking the
user to remove the paper from the Finisher tray.
SC870 occurs after multiple groups are selected
and assigned a number in the address book
programming screen.
SC819 occurs if "Continue to Program" is
performed 196 times in the address book
programming screen.
After the main power comes on with the Weekly
Timer, and the Access Code screen prompts the
user for code entry, the screen can be cleared by
simply opening and closing the cover.
"Bond Paper" does not appear as a selection for
Tray 1 or the LCT in User Tools – System Settings
– Tray Paper Setting.
The machine serial number is not displayed with
SC error codes.
Setting range for SP5501: PM Alarm Level
corrected from 0-255K to 0-9999K.
SP2912-001 (Drum Reverse Rotation, Rotation
Amount) default value changed from 2 # 3, setting
range changed from 0-10 # 1-3.
SP2210 (ID Sensor Pattern Interval) default value
changed from 10 # 100.
SP2201-001, 002, 003, 005 (Development Bias
Adjustment) maximum setting changed from 900 #
800.
SP2931/2/3/4/5/6-001 (Transfer Current On/Off
Timing) default value changed from 0 # 20.
SP2931/2/3/4/5/6-002 (Transfer Current On/Off
Timing) default value changed from 0 # 15.
SP1902-004 (Fusing Web Motor Control, Web
Near End Value) default value changed from 90 #
80.
SC990 sometimes occurs if the signal timing during
scanning and printing causes a delay in the
scanning process.
Firmware modified so that when "2: Europe" is
selected in SP5131 (Paper Size Type Selection), it
is possible to select F-sized originals in User Tools
– System Settings – General Features.
SM
FIRMWARE MODIFICATION HISTORY
FIRMWARE SERIAL
LEVEL NUMBER
1st Mass
B0655102 E
Production
Aug. '02
B0655102 E
Production
8-3
FIRMWARE
VERSION
1.11
1.12.2
...continued
B064/B065