Ricoh B064 Service Manual page 687

[A]
B478I004.WMF
[C]
[D]
B478I107.WMF
5. Install the grounding plate [A] ( x2) (M3x6).
NOTE: Set the grounding plate so that there is no gap between the grounding
plate and the bottom frame of the finisher (as shown).
6. Install the table extension [B] as shown ( x2) (M4x8).
NOTE: The edge of the table extension should be aligned with the edge of the
finisher (as shown).
7. Attach the cushion [C] to the right side of the upper cover.
8. Install the entrance guide plate [D] ( x2) (M3x6).
SM
0 ~ 2 mm
0 ~ 5 mm
3
3000-SHEET FINISHER B478
B478I005.WMF
[B]
B478