Entrance Seal And Side Seals - Ricoh B064 Service Manual

DEVELOPMENT UNIT

3.7.3 ENTRANCE SEAL AND SIDE SEALS

[A]
B064R307.WMF
Development unit (☛ 3.6.1)
[A]: Entrance seal bracket (! x2)
• After removing the screws, press in the catches on either end [B] to release
the entrance seal bracket, then remove it.
• Clean the entrance seal bracket before re-installing it.
• When re-installing, make sure the tabs [C] and notches are engaged at four
locations.
[D]: Side seals
• Remove the side seals from both ends, clean the area, and replace with
new seals.
B064/B065
[C]
[B]
[D]
3-48
B064R308.WMF
SM