Nib & Netfiles Firmware History - Ricoh B064 Service Manual

Firmware History for B064/B065
NIB & NETFILES FIRMWARE HISTORY:
B0655114
D
E
F
SC990 occurs with continuous LPR print jobs sent from a Windows NT station.
Change in Specification:
1. Changed the default setting of DHCP to ON.
NOTE: When upgrading to this version, the DHCP setting will only change to ON if it
is manually set or a factory default clear is performed after update.
2. TCP ports can be opened/closed.
NOTE: After performing the setting to disable HTTP, it is not possible to access the
target device through the web browser. To change this setting, use telnet to
open HTTP. When the telnet port is disabled, it is necessary to clear the
network settings (Memory Clear for NCS) to open the telnet port.
3. Supports new wireless LAN (IEEE802.11b).
NOTE: Since this is due to a vendor change, the new LAN cannot be used with suffix
D firmware.
1st Mass Production
NIB (PHY) NETFILE (NFA)
VERSION VERSION
3.54 1.11
3.55 1.11
3.56 1.11
Description of Modification
CHECK SUM
2658 1st Mass Production
4088 November 2002 Production
177E February 2003 Production
PRODUCTION
Firmware
Level
F
E
D
Page 10 of 10