Changing Parameters - IBM 6400i Setup Manual

Chapter 3

Changing Parameters

Changing Parameters
Printer
Control
Interface
Selection
The following procedure shows you how to change a configuration setting.
Changing the Print Direction from the factory default setting BIDIRECTIONAL
to the setting UNIDIRECTIONAL is provided as an example. Print Direction is
one of the Printer Control menu options. The procedure is similar for other
configuration changes. Use these basic guidelines to navigate the
configuration menus and change other parameters.
NOTE: Press Start at any time to exit the configuration menu.
Step Key
1. Determine which parameters you want to change and what the new values will be. In this
example, the value for the PRINT DIRECTION parameter will be changed from
"BIDIRECTIONAL" to "UNIDIRECTIONAL."
2. Press
Stop
3.
+
Scroll↑ Scroll↓
4.
Menu
92
Display Alarm
Language Control
LCD Results
NOT READY
OPERATOR MENU
UNLOCKED
OPERATOR MENU
PRINTER CONTROL
* = Factory Default
Print Hex Print
Direction Mode
Bidirectional*
Unidirectional
Notes
Places the printer in NOT
READY mode before entering
the operator menus.
Unlocks the Operator Menu,
which allows you to make
configuration changes.
Displays the first Configuration
Main Menu option, PRINTER
CONTROL.