Changing Forms - IBM 5225 1 Operator's Manual

Changing Forms
Follow these steps to change forms:
Step 1
D
Press the Stop Reset key.
Stop Reset
Step 2
Unload the forms (if necessary,
see "Unloading Forms" in Chapter
2).
Step 3
Load the new forms (if necessary,
see "Loading Forms" in Chapter 3).
Step4
Adjust the thickness
control for the correct setting (if
necessary, see "C. Adjusting the
Thickness Control" in Chapter 3).
Step 5
One Line
Press the Start key.
D
Start
Operating Procedures 5-5