Remove The Hammer Bank Protective Foam - IBM 6400i Setup Manual

Remove The Hammer Bank Protective Foam

Figure 7. Exploded View of the Removal of the Hammer Bank Protective Foam, 6400 Series
1. Slide the paper supports outward as far as they will go.
2. Lift the hammer bank protective foam and remove it from between the
3. Rotate the forms thickness lever downward to position "A."
Models
ribbon mask and the platen.
Remove The Hammer Bank Protective Foam
Hammer Bank
Protective Foam
Paper Supports (2)
Forms Thickness
Lever
35