Remove The Platen Protective Foam - IBM 6400i Setup Manual

Remove The Platen Protective Foam

Figure 9. Exploded View of Removal of the Platen Protective Foam, 6400 Series Models
1. Rotate the forms thickness lever downward to position "A."
2. Rotate the platen protective foam toward the front of the printer and out
from under the support shaft.
3. Remove the platen protective foam.
NOTE: The 6400-i20, -i2s, and -i24 models do not have a platen protective
foam.
Remove The Platen Protective Foam
Platen
Protective Foam
Forms Thickness
Lever
37