IBM 6400i Setup Manual page 313

Changing Printer Configuration Settings on iSeries
If you want to change the settings created by iSeries auto configuration, you
will need to use the following parameters:
Parameter
Description
Device description
Device class
Device type
Device type
Device model
Advance Function
Port number Printing
Switch setting
Online at IPL
Attached controller
Font identifier
Form feed
NOTE: AFP *Yes can be specified if the level of iSeries OS supports the
Changing Your iSeries Printer Configuration
Parameter
DEVD Workstation printer name
DEVCLS *LCL
TYPE *IPDS (When printer is set to 4234-12 mode.)
TYPE 4234 (When printer is set to 4234-2 mode.)
MODEL 0000 (00 if IPDS (4234-12) and 02 if SCS (4234-2))
Type can be set to 6408 or 6412.
CTA for 6408 or 6412 model.
AFP *NO (See Note)
PORT x
SWTSET y (Printer station address)
ONLINE *YES
CTL Twinaxial workstation controller name
FONT zzz (Default font identifier)
FORMFEED * Cont
printer as an AFP printer and PSF is installed.
Parameter Setting
313