Operator Print Tests Menu - IBM 6400i Setup Manual

Chapter 4

Operator Print Tests Menu

Operator Print Tests Menu
Operator Print
Tests
(from page 104)
Printer
Demonstration
All H's
NOTE:
(1)
The Adapter Test Page is only available with the
Ethernet Adapter feature installed.
(2)
The Ethernet Test Page is only available with the
Integrated Ethernet feature installed.
The print tests are used to check the print quality and operation of your
printer. The procedure to run these tests is shown on page . The self–tests
include the following:
Printer Demonstration
(The default). Demonstrates some of the functions and features available on
the printer.
Print Error Log
Prints a log of errors that have occurred in the printer.
Ripple Print
A "sliding" alphanumeric pattern used to identify missing or malformed
characters, improper vertical alignment, or vertical compression.
All E's
242
Print Error Ripple
Log Print
All E's + FF Underlines
All E's
Adapter Test Ethernet Test
(1)
Page Page
To view options, press:
Scroll Scroll Enter
To select an option, press:
To exit the configuration menus
and return to READY, press:
* = Factory Default
(2)
Return
Enter
Start