Ribbonminder Menu - IBM 6400i Setup Manual

RibbonMinder Menu

RibbonMinder
(from page 104)
New Ribbon Ribbon
XXX% Action
Press the ENTER Disable*
key to reset ribbon Display
life to 100%. Fault Immediate
Fault Paper Out
New Ribbon
This provides a means to manually set the printer when a new ribbon has
been installed. The ribbon life displayed on the control panel (if active) sets to
100%. The count internal to the printer also resets, and the tabulation towards
end of ribbon life begins.
Ribbon Action
•
Disable (the default). When Disable mode is selected, the ribbon life
display is removed from the control panel, but the Ribbon Minder
continues to monitor ink consumption. No indication (no flashing light, or
warning beep) is given, and the printer continues to accept new print jobs
indefinitely.
Ribbon
Type
6400-I Premium 30 Ribbon*
6400-I Premium 20
6400-I Premium 2000
To view options, press:
To select an option, press:
To exit the configuration menus
and return to READY, press:
* = Factory Default
RibbonMinder Menu
Print Format Menu
Ribbon End
Point
Normal* Disable*
Reduce 5% - 100% Enable
Extend 5% - 100%
Scroll Scroll Enter
New Ribbon
Detect
Return
Enter
Start
245