Chapter
4
Code V Feature (VGL)
PI Control
Printer PI
•
•
Host PI
•
•
PI Slew Range
You can specify how many lines the paper will feed.
•
•
218
Disable (the default). Does not inform the Code V that the ASCII
emulation is configured with the PI line enabled.
Enable. Informs the Code V that the ASCII emulation is configured
with the PI line enabled.
Disable (the default). The Data Bit 8 configuration option must be
disabled to transmit the PI line to the printer.
Enable. Informs the Code V that the host sends PI signals.
Enable (the default). A paper slew of 0-15 will move 1-16 lines.
Disable. A paper slew of 1-15 will move 1-15 lines. A paper slew of 0
will move 1 line.