IBM 6400i Setup Manual page 211

Graphics
Options
(from page 210)
Slashed Zero Ignore Dots
Value
Disable*
Disable*
Enable
Enable
Absorb at ^PY UPC
Descenders
Absorb Motion* Enable*
Disable Disable
Absorb All
Expanded LP+ Font
Font
Block* Disable*
Scalable Enable
SFCC and Power On
Select SFCC
Selects the Special Function Control Character. Valid values are 11 (hex)
through FF (hex). The default value is 5E (hex). Always use the SFCC
required for your configuration wherever the circumflex, or (cc) is shown.
Obtain a configuration printout to determine the currently selected SFCC.
Power On ^X
Selects the ignore mode power up condition. Refer to the 6400 Code V
Programmer's Reference Manual for more information.
•
Disable (the default). Does not select the ignore mode as the power-up
default.
•
Enable. Selects the ignore mode as the power-up default, and selects the
graphics mode (cc)PY as the power-up default. All characters are ignored
until a (cc)A command is received.
Append
Rotated
Disable* Disable*
Enable Enable
Rotate Ignore
Character Size Spaces
Adjusted* Disable*
Not Adjusted Enable
Width Limit Absorb at ^PN
Disable* Disable*
Enable Enable
Code V Emulation Menu
Truncate Off True Vertical
Page Alpha 1/10
Disable*
Enable
Midline PY
Enable* Disable*
Disable Enable
IGP110
Compatibility Graphics
Enable* Disable*
Disable Enable
Dark
Barcode
Inline
211