Table of Contents
Advertisement
PTR Setup Option
This option selects the Special Function Control Code (SFCC) for the
PTR_SETUP command and functions. The selections for this process are
given below.
Setup Parse
This selection is used to enable or disable the PTR Setup Option.
•
Disable (the default)
•
Enable
•
Ignore
Setup SFCC
Sets the legal hex values from 01 through FF. These represent the ASCII
code (in hexadecimal) of the character used as the SFCC.
•
21h (the default). Corresponds to the "1" character.
•
1 – FF
File System
Provides the means for listing, viewing, and manipulating files in flash
memory. The following selections are available.
•
Overwrite. This selection controls whether the files in flash memory can
be overwritten. With the default selection of Enable, files are overwritten.
If the selection is disabled, the files can not be overwritten.
•
View Files. This selection provides a list of files in flash memory.
Pressing the Scroll ↓ key allows you to view the file size.
•
Delete Files. This selection provides a list of files in flash memory.
Pressing the Enter key will delete the displayed file from flash memory.
•
Optimize & Reboot. Pressing the Enter key with this selection displayed
will reclaim flash memory space and reboot the printer.
IMPORTANT
Do not turn the printer off until it has completed the reboot and is either
Ready or Not Ready.
•
Print File List. Pressing the Enter key with this selection displayed will
cause the printer to print a summary of files stored in flash memory.
Statistics on file system usage are also printed.
Power Stacker
This parameter determines whether or not the power paper stacker is enabled
or disabled. This parameter is not presented if the power paper stacker is not
installed.
•
Enable (the default)
•
Disable
Printer Control Menu
111
Advertisement
Table of Contents
