Connect The Interface And Power Cables (Cabinet Models)
Setting Rear Paper Exit
I/O Connector
I/O Cover
Figure 30. Upper-Rear Inside View of the Cabinet Model Showing I/O Cover Removal
3. Open the cabinet rear door.
4. Remove the cover from the I/O connector you have selected.
I/O Cable
Grommet
Figure 31. Bottom-Rear Inside View of the Cabinet Model Showing the Cable Routing Notch
5. Locate the notch in the lower-left corner of the back of the cabinet.
6. Hold the I/O cable below its connector, and gently push the cable through
the opening in the grommet seated in the notch.
55