IBM 6400i Setup Manual page 59

Parallel Connector
Serial Connector
NOTE:
(1)
The Dataproducts adapter feature attaches to the PC
Parallel interface connector.
(2)
Twinax, Coax, and Ethernet Interfaces appear only if these
features are installed.
Figure 36. Views of Interface and the AC Power Connector
3. Make sure that the printer power switch is set to OFF. See Figure 29 on
page 54.
I/O Connector
Figure 37. I/O Cover Removal from the Interface
4. Remove the cover from the I/O connector you have selected.
Connect The Interface And Power Cables (Pedestal Models)
Auxiliary I/O
Setting Rear Paper Exit
A
AC Power Connector
A
Power Switch
On Off
59