IBM 6400i Setup Manual page 154

Chapter 4
3270 Interface Menu
Compatibility Option 9:
CR, EM, and NL (3287 only)
CR (Carriage Return), EM (Error Message), and NL (New Line) specify that
the printer treat the CR, EM, and NL control codes either as spaces or as
control codes.
•
ON (the default). Treats the CR, EM and NL commands as control codes.
•
OFF. Treats the CR, EM and NL commands as spaces.
Compatibility Option 10:
Bottom Margin (SCS data stream only)
Any bottom margin specified or implied by a host command will be
overridden, causing the operator panel bottom margin value to be used
•
OFF (the default). Ignores the operator panel bottom margin value.
•
ON. Forces the bottom margin to the value specified by the operator
panel.
NOTE: If Bottom Margin is ON, the operator can enter a bottom margin; the
154
top margin will be forced to zero. If it is OFF, the operator panel
bottom margin is forced to zero.