WEG CFW100 Programming Manual page 91

I/O
P254 - AO2 Output Function
Range:
Description:
These parameters sets the functions of the analog outputs, according to function and scale presented in
on page 9-8.
9
(*) For further details refer the
P252 - AO1 Output Gain
P255 - AO2 Output Gain
Range:
9-8 | Micro Mini Drives
0 = Speed Ref.
1 = Not Used
2 = Real Speed
3 to 4 = Not Used
5 = Output Current
6 = Not Used
7 = Active Current
8 to 10 = Not Used
11 = Motor Torque
12 = SoftPLC
13 to 15 = Not Used
16 = Motor Ixt
17 = Not Used
18 = P696 Value
19 = P697 Value
20 = Not Used
21 = Application Function 1
22 = Application Function 2
23 = Application Function 3
24 = Application Function 4
25 = Application Function 5
26 = Application Function 6
27 = Application Function 7
28 = Application Function 8
29 = Control Setpoint
30 = Process Variable
Table 9.2: Full scale of the analog output
Function
0 Speed reference at the input of the ramp P001
2 Effective speed at the inverter output
5 Total output current RMS
7 Active Current
11 Torque on the motor in relation to the rated torque
12 SoftPLC scale for analog output
16 Ixt overload of the motor (P037)
18 Value of P696 for analog output AOx
19 Value of P697 for analog output AOx
21 to 28 Value defined by the SoftPLC application
29 Control Setpoint (PID Controller Application)
30 Process Variable (PID Controller Application)
Chapter 14 APPLICATIONS on page
0.000 to 9.999
Description
14-1.
Table 9.2
Full Scale
P134
P134
2 x P295
2 x P295
200,0 %
32767
100 %
32767
32767
32767
(*)
(*)