WEG CFW100 Programming Manual page 37

HMI
P210 - Ref. Decimal Point
P511 - SoftPLC Indication Form
Range:
Description:
This parameter allows setting the position of the decimal point displayed on the HMI. P210 is linked to the indication
of parameters P001 and P002. P511 is is linked to the indication of the SoftPLC user's parameters. That is, any
SoftPLC user's parameter linked to the SoftPLC indication form will be displayed in this format.
P213 - Bar Scale Factor
Range:
5
Description:
This parameter configures the full scale (100 %) of the bar graph to indicate the parameter selected by P207.
P842 - Quick View 1 IR
P843 - Quick View 2 IR
Range:
Description:
These parameters define which parameters (their respective values) will be viewed by using the
remote control (available with expansion module).
For further details, refer to the installation, configuration and operation guide of the expansion module.
5-4 | Micro Mini Drives
0 = wxyz
1 = wxy.z
2 = wx.yz
3 = w.xyz
1 to 9999
0 to 959
key of the infrared