Table of Contents
Advertisement
2
Using Probe Heads
1. MX0100A InfiniiMax Micro Probe Head
The MX0100A is a small,
flexible, and lightweight
solder-in probe head that
allows you to conveniently
probe denser and
smaller-sized target devices.
The micro size and flexibility features of this probe head overcome the probing
challenges faced with the smaller pads and narrower spacing in such small
devices..
This probe head configuration supports the highest bandwidth and provides the
full bandwidth signals (1134B: 7 GHz, 1132B: 5 GHz, 1131B: 3.5 GHz, and 1130B:
1.5 GHz) and the lowest capacitive loading for measuring both single-ended and
differential signals.
This probe head connects easily to an InfiniiMax probe amplifier using the bullet
adapter shipped with the probe head.
For connection to a DUT, it has pre-wired probe tip leads that allow solder-in
connection to very small, fine pitch targets.
Figure 17 MX0100A probe head connected to DUT and InfiniiMax probe amplifier
38
MX0100A Probe
MX0103A Bullet
Head
Adapter
InfiniiMax Probe
Amplifier
1130B-Series Probes User's Guide
Advertisement
Table of Contents
