Keysight Technologies 1130B User Manual page 30

1
Getting Started
Description
Double-sided Foam Tape
To provide strain-relief to either the neck portion of the
probe head or the plastic housings by taping it to a flat
surface such as a tabletop or a DUT circuit board.
Regular Solder Wire
Lead free, .009" diameter, 2 feet long
To attach the probe tip wires to a DUT using standard
lead-free soldering temperatures (330 °C to 350 °C).
(NOTE: This alloy melts at 217
Low Temperature Solder Wire
Lead free, .010" diameter, 2 feet long
To attach the probe tip wires to a DUT using a low tem-
perature setting on your soldering iron.
(NOTE: This alloy melts at 138
Probe Tip Wire
.004" diameter, 2 feet long
To add ground wires to your probe tip if InfiniiMode mea-
surements (differential, single ended, and common
mode signals with a single probe tip) are desired. Clip as
short as possible using the cutting tweezers included in
the kit.
* You can reorder these items using the part numbers included in the table above.
30
o
C.)
o
C.)
Qty Part
*
Supplied Number
10 0460-3122
1 MX0102-21302
1 MX0102-21303
1 MX0102-21301
1130B-Series Probes User's Guide