Table of Contents
Advertisement
1
Getting Started
Table 1
Oscilloscope
Infiniium Oscilloscopes
S-Series
90000 X-, and Q-Series
90000A Series
86100C/D Series
9000 H-Series
9000A-Series
8000A-Series
InfiniiVision Oscilloscopes
6000 X-Series
4000 X-Series
3000 X-Series
7000A Series
6000A Series (350 MHz — 1 GHz)
5000A Series
Channel Identification Rings
When multiple probes are connected to the oscilloscope, use the channel
identification rings to associate the channel inputs with each probe. Place one
colored ring near the probe's channel connector and place an identical color ring
near the probe head.
Inspecting the Probe
Figure 3
probe amplifiers. The probe amplifiers do not come with a probe head unless
selected at the time of order. Any head shown in
ordered at any time for any 1130/1/2/4B probes.
•
•
10
Compatible Oscilloscopes
on page 11 shows the accessories that are shipped with the 1130/1/2/4B
Inspect the shipping container for damage.
Keep the damaged shipping container or cushioning material until the contents
of the shipment have been checked for completeness and the probe has been
checked mechanically and electrically.
Check the accessories.
Adapter Required
none
N5442A
none
N1022A/B
none
none
none
none
none
none
none
none
none
Figure 2
on page 9 can be
1130B-Series Probes User's Guide
Advertisement
Table of Contents
