Table of Contents
Advertisement
2
Using Probe Heads
Do not solder in resistor leads with a big ball of solder right next to the resistor body.
CAUTION
Normally the nickel lead will limit the heat transfer to the resistor body and protect the
resistor, but if a ball of solder is right next to the resistor body on the lead, the resistor
may come apart internally.
When soldering leads to DUT always use plenty of flux. The flux will ensure a good,
CAUTION
strong solder joint without having to use an excessive amount of solder.
Strain relieve the micro coax leading away from the solder-in tips using
CAUTION
hook-and-loop fasteners or adhesive tape to protect delicate connections.
Before using the resistors, the resistor wires must be cut to the correct dimensions. For the
N OT E
correct dimensions see
Heads"
Table 12 Supplied Accessories
Description
91W resistor for full bandwidth
150W resistor for medium bandwidth
91W resistor template
150W resistor template
50
"Replacing Resistors on E2677B/9B Solder-In Probe
on page 74".
Qty
Part
Supplied
Number
20
1NC3-1091
(not orderable)
10
1NC3-1150
(not orderable)
1
01131-94311
(not orderable)
1
01131-94308
(not orderable)
1130B-Series Probes User's Guide
Advertisement
Table of Contents
