Step 3 - Connecting The E5408A/B Probe Pods To The U4201A Logic Analyzer Cable Pods - Keysight Technologies W3301A Installation Manual

3 Setting up the W3301A Interposer

Step 3 - Connecting the E5408A/B Probe Pods to the U4201A Logic Analyzer Cable Pods

Two U4201A cables are needed for each E5406A probe used in the setup.
The two pods of the E5406A/B probe and U4201A cable are labeled Odd and Even. Connect these
pods as follows:
•
•
•
Similarly, connect the other E5406A probe's Odd and Even pods to the third and fourth U4201A
cables used in the setup.
Figure 9
30
Connect the Odd pod of E5406A to the Odd pod of the first U4201A cable.
Connect the Even pod of E5406A to the Odd pod of the second U4201A cable.
Do not connect the Even pods of the two U4201A cables used in the setup.
An E5406A/B Probe's pods connected to the Odd pods of two U4201A Cables
Keysight W3301A LPDDR3 BGA Interposers Installation Guide