Operational Check - Sargent Profile Series v.S2 Installation Instructions Manual

Profile Series v.S2 WiFi Mortise Lock

Operational Check

9
For 8276 and 8278 Function mortise locks with cylinders:
1. Insert key into cylinder and rotate (There should be no friction against lock case, wire harness or any
other obstructions.
Refer to Section 7, Step 8 if harness friction exists).
2. The key will retract the latch.
Key should rotate freely.
3. If the deadbolt is thrown, the key will retract
both the deadbolt and the latch.
4. Inside lever retracts latch and
deadbolt (if provided).
5. Use a 13.56 MHz credential, 125 kHz
proximity credential, or keypad PIN code
set up with the Lock Configuration Tool to
unlock outside lever and retract latch.
Refer to Network and Lock Configuration
Tool user manual (WFMN1D) for information on
how to configure and program v.S2 locks.
1-800-810-WIRE • www.sargentlock.com • A7786E 15