Sargent Profile Series v.S2 Installation Instructions Manual page 15

Step #13 – Install (or Replace) Batteries
IMPORTANT: Batteries are optional if controller is powered by external power supply.
1. To install or replace batteries, first remove the battery cover
(if necessary) using the provided security tool (Fig.13A).
2. Unscrew the bottom screw of the battery keeper
and remove the battery keeper, being careful
not to break the tabs at top that hold it in
place (Fig.13B)
3. Place (6) "AA" alkaline batteries in the
compartment, being careful to align
polarity properly.
4. Replace battery keeper being careful to engage
tabs at top to hold it in place (Fig. 13B).
5. Attach battery cover to inside escutcheon,
making sure to line up tabs with retaining
slots in battery cover.
6. Secure with the security screw
using tool. (Fig. 13A).
14 1-800-810-WIRE • www.sargentlock.com • A7786E
Battery
Cover
Security Tool
(01-029)
Security
Screw
Fig. 13A
Inside of Door
Profile Series v.S2 WiFi Mortise Lock
Fig. 13B
Tabs
Fig. 13C
Retaining
Slots