Operational Check - Sargent ASSA ABLOY SE LP10 Installation Instructions Manual

Operational Check

8
1. Insert key into cylinder and rotate:
The key will retract the latch.
The key should rotate freely.
2. Ensure inside lever retracts latch.
3. Close door: Ensure latch is fully extended and does not bind.
Wiegand Test Unit
The ASSA ABLOY Wiegand Test Unit verifies your installation in
the field*. The test unit checks for proper wiring, card reader data
integrity, lock functionality including lock/unlock, door position
status, and request-to-exit (REX) status.
In addition, this tool provides product demonstration abilities to
highlight the product's features and capabilities.
*For directions on use, see operating
instructions provided with unit.
Feature
12 or 24VDC solenoid lock
voltage adjustable
Operates as Fail Safe or Fail
Secure
"Learn" mode allows testing
of specific cards without pro-
gramming at panel level
Card reader data integrity is
validated at test unit
Displays detailed Wiegand
data, including hexadecimal
string and total bits received
Displays measured end-of-line
resistor values (if applicable)
20 A8117G • 800-810-WIRE (9473) • www.sargentlock.com
SE LP10 Cylindrical Lock
WT1 WT2
X X
X X
X X
X X
X
X