Installation Instructions - Sargent Profile Series v.S2 Installation Instructions Manual

Profile Series v.S2 WiFi Mortise Lock

Installation Instructions

8
Step #1 – Door Preparation
A. Verify Hand and Bevel of Door
Stand on outside/locked side of door when determining the door hand.
LH
Left Hand
Hinges Left
Open Inward
B. Door Preparation
Prior to installation, all holes must be free of burrs, debris and sharp edges.
Prepare door according to appropriate template (see website www.intelligentopenings.com):
Door Manufacturing Template: 4533
Through-bolt Hole
Ribbon Cable Hole
(Controller to Keypad)
Outside Cylinder Hole
(only with cylinder installation)
Lever Handle Hole
LHRB
Left Hand
Reverse Bevel
Hinges Left
Open Outward
Fig. 1A
Outside of Door
Mortised
Pocket
Fig. 1B
RH
Right Hand Right Hand
Hinges Right Reverse Bevel
Open Inward Hinges Right
Open Outward
Inside of Door
Pre-drilled and/or
Tapped Holes
1-800-810-WIRE • www.sargentlock.com • A7786E
RHRB
Through-bolt Hole
Ribbon Cable Hole
(Controller to Keypad)
Inside of Lockbody Wire Hole
Thumb Turn Lever Hole
Lever Handle Hole
7