General Description; Hardware Specifications; Electronic Specifications; Installation Wiring Overview - Sargent Profile Series v.S2 Installation Instructions Manual

Profile Series v.S2 WiFi Mortise Lock

General Description

2
The SARGENT Profile Series v.S2 mortise lock is available with either an HID® 125 kHz prox or 13.56 MHz
iCLASS® technology reader. It is designed for applications requiring wireless access control. The v.S2 is a
self-contained microprocessor-controlled access control product with non-volatile memory. It is able to utilize
the existing wireless LAN (802.11b/g) in order to communicate with the access control system. The v.S2 lock
holds a total of 2400 unique users per lock.
This product is operated by six (6) "AA" alkaline batteries or a SARGENT 3267 9VDC power supply. SARGENT
mortise locks are designed with quality components to provide high security, performance and durability.
The Profile Series v.S2 mortise lock may be used for both indoor and exterior applications. A weather-
protective gasket (provided with unit) is recommended for exterior applications.
HID® and iCLASS® are registered trademarks of HID Global Corporation.

Hardware Specifications

3
• Latch: One-piece stainless steel, 3⁄4" projection
• Deadbolt: One-piece hardened stainless steel
• Guardbolt: Stainless steel, non-handed
• Handed: Easily field reversible without
opening case
• Case: 12-gauge, heavy duty wrought steel
• Locks furnished for 1-3/4" doors. Can be
furnished for other door sizes upon request.
Consult factory.
• UL Listed (3 hours)
• Inside lever retracts latch and deadbolt

Installation Wiring Overview

5
SARGENT Profile Series WiFi
v.S2 Typical Application
Internal
Building
Network (Intranet)
Ethernet LAN
Network
Interface
Card
Lock Management
Tool (LMT)
802.11b/g Wireless Network Device
v.S2 Lock
1-800-810-WIRE • www.sargentlock.com • A7786E

Electronic Specifications

4
• Wireless (WiFi 802.11 b/g) online,
battery-operated
• 2400 users per lock
• 10,000 Event audit trail
• Centralized lock management
• Door Status Monitoring*
• Easy installation (no need to hardwire)
• Input Power: DC 9V, 1.5A (6 AA alkaline
batteries or optional hard-powered)
• Lockdown capable*
• Supports HID® 125 kHz prox or 13.56
MHz iCLASS® credentials (26 - 39 bit);
supports CSN reads for other common
13.56 MHz cards, including MiFare, Des-
Fire, and Felica
• Supports most current WiFi networks
security standards
• For specific security information, please
contact a local ASSA ABLOY Door Se-
curity Solutions sales consultant or call
800-810-WIRE
* Lockdown and real-time door status
monitoring available only when lock is
hard-powered
3