Operational Check - Sargent Profile Series Installation Instructions Manual

Operational Check

7
For 82276- and 82278-function mortise locks with cylinders:
1. Insert key into cylinder and rotate.
There should be no friction against lock case, wire harness or any
other obstructions.
(Refer to Section -6 Wiring if harness friction exists).
2. Check that the key retracts the latch:
The key should rotate freely.
3. Throw the deadbolt:
Check that the key retracts both the deadbolt and the latch.
4. Try the inside lever:
Ensure it retracts latch and deadbolt (if provided).
5. Present a valid iCLASS credential to un-
lock outside lever and retract latch.
14 1-800-810-WIRE • www.sargentlock.com • A8078A
Profile Series v.N2 Mortise Lock