Removing The Top-Chassis Fan; Prerequisites; Procedure - Alienware Aurora R6 Service Manual

Removing the top-chassis fan

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
inside your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.

Prerequisites

1. Remove the left-side cover.
2. Follow the procedure from step 1 to step 4 in

Procedure

1. Remove the screw that secures the top-chassis fan to the chassis.
2. Disconnect the top-chassis fan cable from the system board.
3. Remove the top-chassis fan from the chassis.
1. chassis
3. top-chassis fan
4. Remove the top-chassis fan cable from the routing guide on the top-chassis fan bracket.
5. Push the rubber grommets through the holes at each corner of the fan to release top-chassis fan from the bracket.
6. Lift the top-chassis fan off the top-chassis fan bracket.
computer. After working inside your computer, follow the instructions in
"Removing the power-supply unit".
2. screw
4. top-chassis fan cable
After working
www.dell.com/
75