Removing multiple graphics
cards
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Prerequisites
1
Remove the
2
Remove the left and right side-panels. See
Procedure
1
Lay the chassis on the right side.
2
Locate the graphics cards (PCI-Express card connector) on the system
board. For more information on the graphics card connector, see
board
components".
stability
foot.
computer. After working inside your
After working inside your
"Removing the side
panels".
"system-
75
Need help?
Do you have a question about the Area-51 R3 Threadripper Edition and is the answer not in the manual?