Removing The Antenna Cables; Prerequisites; Procedure - Alienware Area-51 R3 Threadripper Edition Service Manual

Removing the antenna cables

WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.

Prerequisites

1 Remove the
2 Remove the left and right side-panels. See
3 Remove the
4 Remove the
5 Remove the
6 Remove the
7 Remove the
8 Remove the
9 Remove the

Procedure

1 Disconnect the antenna cables from the wireless card.
174
stability foot.
handle bars.
memory modules.
full-length graphics
wireless card.
processor liquid-cooling
system board.
rear bezel.
computer. After working inside your
After working inside your
"Removing the side
cards.
assembly.
panels".