Removing The Antenna; Prerequisites; Procedure - Alienware Aurora R6 Service Manual

Removing the antenna

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow the
steps in Before working inside your
inside your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.

Prerequisites

1. Remove the left-side cover.
2. Remove the right-side
3. Remove the top cover.
4. Follow the procedure from step 1 to step 4 in

Procedure

1. Note the antenna-cable routing and remove the antenna cables from the routing guides inside the chassis.
2. Push down the antenna cables towards the top of the computer through the cable-routing slot on the chassis.
a. antenna cables
b. routing guides
c. chassis
3. Remove the antenna cables from the routing guides on the chassis.
4. Pry the antenna off the chassis.
computer. After working inside your computer, follow the instructions in
cover.
"Removing the wireless card".
After working
www.dell.com/
69