Replacing the base panel
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before working inside your
computer, follow the instructions in
computer. For more safety best practices, see the Regulatory
Compliance home page at www.dell.com/regulatory_compliance.
Procedure
1
Align the tabs from inside the chassis on the right side and left side,
securing the base panel to the chassis and snap it in place.
2
Replace the two screws ((#6-32x6) from inside, securing the base panel to
the right side of the chassis.
3
Replace the three screws ((#6-32x6) from inside, securing the base panel to
the left side of the chassis.
4
Replace the four screws (#6-32x6) that secure the base panel to the
chassis.
Post-requisites
1
Replace the
2
Replace the
3
Replace the left and right side-panels. See
4
Replace the
hard drive
(HDD1).
battery
case.
stability
foot.
computer. After working inside your
After working inside your
"Replacing the side
panels".
165