Replacing The Stability Foot; Procedure - Alienware Aurora R5 Service Manual

Replacing the stability foot

WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in
After working inside your computer, follow the instructions
in After working inside your
practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.

Procedure

1
Place the computer on a clean and flat surface with the bottom cover
facing up.
2
Align the tabs on the stability foot with the slots on the bottom cover and
snap the stability foot to lock it in place.
3 Turn the computer over and place it in upright position.
Before working inside your
computer. For more safety best
computer.
21