Language - Barco iQ PRO G 500 Owner's Manual

13. Installation menu
Image 13-7

13.4 Language

List of languages
The list of selectable languages is depending on the software of the projector.
How to change the Language ?
1. Press MENU to activate the Tool bar
2. Press → to select the Installation item
3. Press ↓ to Pull down the Installation menu
4. Use ↑ or ↓ to select Language
5. Press → to pull down the menu
6. Use ↓ or ↑ to select the desired language (image 13-8)
7. Press ENTER
The language is adapted and a black bullet shows the active configuration.
Image 13-8
116 R5976491 IQ PRO G 350/500 19/09/2006