Language; User Interface - Barco G62 User Manual

11.6 Language

About language
Select a language for the OSD menu.

11.7 User interface

About user interface
Configure the user interface related settings.
On screen display
Set up the on screen display menus.:
• Menu location:
Select the menu location from Top Left, Top Right, Center, Bottom Left, and Bottom Right.
• Menu transparency:
Set the menu transparency level.
• Menu timer:
Set the length of time the menu displays on the screen.
• Show message:
Enable or disable the corner information messages, such as input source, IP address, etc.
• Background:
Set a background color to display when no input signal is detected. The available options are Blue, Black,
White, and Logo.
• Reset:
Reset the menu settings to default factory values.
Logo setup
Set up the logo for the startup screen.
• Change logo:
Change the logo for the startup screen, apart from the Default logo, the user can also select a Captured
Logo.
- Default logo:
The default startup screen.
- Captured logo:
The logo is saved via the Logo Capture function.
• Logo capture:
Capture an image as the logo for the startup screen.
- Save:
Save the captured logo.
• Delete logo:
Delete the saved Captured Logo.
Backlight
Set up the projector backlight options.
• Keypad:
Enable or disable the keypad backlight.
• Power key:
Enable or disable the backlight for the power key.
User controls – Settings menu
R5914653 /10 G62 75