Procedure (1.01 Ghz To 1.5 Ghz) E4401B And E4411B - Agilent Technologies ESA-E Series User Manual

Procedure (1.01 GHz to 1.5 GHz) E4401B and E4411B

1. Press the following keys on the analyzer:
,
Sweep Sweep (Cont)
,
FREQUENCY Start Freq
,
Stop Freq 1.5 GHz
,
BW/Avg 1 MHz
Video BW Auto Man
2. Press the following keys on the analyzer:
Single
,
BW/Avg Average (On)
Single
Wait until AVG 3 is displayed to the left of the graticule (the
analyzer will take 3 sweeps, then stop).
3. Press , and record the marker frequency in the Measured
Peak Search
Frequency column (c) in
4. Press the following keys on the analyzer:
,
Sweep Sweep (Cont)
,
BW/Avg Average (Off)
,
BW/Avg Resolution BW (Auto)
Video BW (Auto)
,
SPAN 50 kHz
FREQUENCY
5. Press . Set the center frequency of the analyzer to the
Center Freq
frequency recorded in the Measured Frequency column (c) in
Table 3-1 for 1.01 GHz to 1.5 GHz.
6. Press the following keys on the analyzer:
,
BW/Avg 1 kHz
Video BW Auto Man
Single
Wait for the sweep to finish.
Chapter 3
,
1.0 GHz
,
10 kHz
, ,
3 Enter
Table 3-1 for 1.01 GHz to 1.5 GHz.
,
30 Hz
Functional Testing
Displayed Average Noise Level
3-9