Rename A File - Agilent Technologies ESA-E Series User Manual

Rename a File

1. To access the
2. Select the type of file you want to rename (setup, state, trace, limits,
screens, or corrections). In this example you are renaming a trace
file; press
3. Select the drive and directory where your file is located. In this
example, choose drive C:\START.
4. Select the file you want to rename. In this example, choose the file
TEST1.TRC.
5. Press
rename the file to RENAME using the Alpha Editor softkeys. (The
Name: field is limited to eight characters.) Your display should look
similar to
6. Press
the directory displayed on your analyzer. The status line displays the
message: C:\START\TEST1.TRC file renamed to
C:\START\RENAME.TRC.
Figure 2-13 Renaming a File
Chapter 2
menu, press
Rename
, .
Type Trace
to open the Alpha Editor menu. For this example,
Name
Figure 2-13.
, : your file is now renamed and visible within
Enter Rename Now
Getting Started
File Menu Functions
, .
File Rename
2-35