Creating A Directory - Agilent Technologies ESA-E Series User Manual

3. The softkey menu has four options:
Navigation keys: Use the front-panel
NOTE
or
4. The drive space line shows the number of bytes used on the drive

Creating a directory

Directories and sub-directories can be created on both the A: floppy disc
and the internal C: drive. This allows maximum flexibility in
organizing files. For this example, we will create a directory on the C:
drive.
1. Press
2. Navigate through the file system until the Path: field displays C:\.
3. Press
4. Press
5. To make a sub-directory, scroll down to the START directory you just
Chapter 2
d. Modified: column displays the date and time the last change
occurred.
a. allows you to choose the type of file you wish to view. (You
Type:
may view all types by using the
b. : Under the
Sort Sort
and you can choose up (ascending) or down (descending).
c. : moves you up one directory level. If you are already at the
Dir Up
top level, this key moves you up to the drive level, displaying the
available disk drives.
d. : moves you down into the highlighted directory or up
Dir Select
into the next level (directory or drive) if the ". ." under the Name:
column is highlighted.
keys to move around in the directory information box.
Dir Select
and the number of bytes still free on the drive.
,
File More 1 of 2
Figure 2-6, except the entry fields will be Dir Name: and Path: and
the Heading will read: Directories.
(Use the Step Keys, Knob, Dir Up, and/or Dir Select keys.)
and enter the name, "START" using the Alpha Editor.
Name
(The numeric keypad is also available for the filename.) Press
(hardkey) when the Dir Name: field contains this directory title.
(Use the hardkey on the front panel to make corrections.)
Bk Sp
Create Dir Now
Creating Directory appears on the screen. Then the status bar
displays: Directory C:\START created.
created and press
Dir Select
C:\START\. Repeat Steps 3 and 4 above, using a new name. The
status bar now should read: Directory C:\START\new name
created.
key under
All
key, you can sort by any of the four columns
Step Keys
, . Your screen should look similar to
Create Dir
to execute the operation. The message:
. The Path: field should now read:
Getting Started
File Menu Functions
Type.)
or and the
Knob Dir Up
Enter
2-27